Premier Wireless Sensors
Temperature Sensor
Temperature Sensor
The DecentLab Temperature Sensor is a LoRaWAN®-enabled sensor used for outdoor remote monitoring, cold chain, storage, building automation, smart agriculture and open water or tank temperature.
Learn more
Water Leak IP67
The Leak Detector can be placed near bathrooms, washing machines, and other appliances or fixtures and will keep an eye out for water leaks. It can detect as little as three drops of water. The Leak Detector will notify the user on sensing water and the Valve Controller (sold separately) will automatically shut off water to prevent further damage. Three separate set of sensors, the Bottom (Main) Sensors, the Drip Tray, and the Remote Sensor Probe (optional), act together to monitor any appliance or fixture for leaks.
Learn more
Electric Sub-Meter
The SQUID can simply and easily sub-meter your single-phase or three-phase electrical installation. Installed in an electrical panel, the SQUID’S 12 clamps allow you to sub-meter your installation fully, without decommissioning or modification. The SQUID is compatible with several different clamp sizes from 10mm to 36mm in diameter, with max currents ranging from 60A to 600A (sold separately).
Learn more
BOB Assistant Predictive Maintenance Sensor
The Bob Assistant predictive maintenance sensor by eolane learns quickly and well! It applies analysis algorithms embedded in the sensor to understand and monitor all of your equipment. Zero infra, zero wiring, zero configuration. To install Bob, simply place it on your equipment. Bob works independently for several years.
Learn more
Field Test Device
The Field Test Device has an Immediate viewing of network coverage data with Geolocation of measuring points. It is a benchmark product widely praised by public network operators.
Learn more
ELT Lite Wireless Transceiver
This device helps many cities become smarter and in control of their surroundings. The ELT Lite is enclosed in an IP67 box and is designed to be mounted outside or in extreme conditions. You can use the ELT Lite together with an external sensor of your choice to build your own solution.
Learn more
Yabby Compact GPS Tracker
The Yabby is a compact, rugged GPS tracking device that has been designed for tracking assets where a small device is required, such as on animals, livestock, packages, bags, bicycles and other assets. The IP67 rated housing is rugged and UV stable, so the Yabby can be mounted on assets that are exposed to rain, dust and outdoor conditions.
Learn more
LoRa Spy T3 Extreme Low Temper Recorder
The long-range wireless data logger LoRa SPY T3 measures and records ultra-low temperature thanks to an external probe. Designed to monitor low temperature in ultra-low freezers and LN2 tanks, the LoRa® SPY T3 can be placed on the outside thanks to its magnet allowing to visualize data measurement. Includes a PT100 stainless steel probe, Cl. A, Ø3x20 mm with 3m teflon/teflon cable Ø2,9mm (-200 +0°C).
Learn more
Wireless Turbidity Sensor
The RA0710 is integrated with a turbidity sensor (ZS-206) that is designed and manufactured using the principle of scattered light turbidity measurement. The LoRa module of the RA0710 communicates with the turbidity sensor in the form of RS485 communication to obtain the current turbidity signal value and sends it through a wireless gateway.
Learn more
Water Leak Sensor
The Dragino LWL01 is a LoRaWAN Water Leak Sensor. It detects the water leak status and send it to LoRaWAN network. LWL01 is powered by a CR2032 coin battery, in a good LoRaWAN Network Coverage case, it can transmit as many as 12,000 uplink packets (base on SF7, 14dB). in poor LoRaWAN network coverage, it can transmit ~ 1,300 uplink packets (base on SF10, 18dB). The design goal for one battery is up to 2 years. User can easily change the CR2032 battery for reuse.
Learn more
Thermocouple Temp Sensor
This Radio Bridge thermocouple temperature sensor can be configured via downlink messages. Temperature reporting can be based on thresholds, report-on-change, and periodic messaging. Versions of the sensor support the major LPWAN standards such as Sigfox, LoRa/LoRaWAN, and NBIoT.
Learn more
Analog or Digital Sensor (Switch)
The device DL-DLR2 is a multi-purpose LoRaWAN® sensor reader and transmitter manufactured by Decentlab. It can be configured by the manufacturer for a variety of sensor models. For example, DLDLR2 can be configured to read a pressure sensor through the integrated RS-485 interface; or a temperature / humidity sensor through the integrated I2C interface; or an ultrasonic rangefinder through the integrated serial (UART) interface. It can also be configured to read analog voltage or current signals (0 … 3 V, 4 … 20 mA, etc.).
Learn more
Smart-Kill Electronic Rat Trap
When you’re dealing with a rodent problem, there’s plenty of frustrations to deal with – remembering to constantly check your traps shouldn’t be one of them. With the Victor Smart-Kill Electronic Rat Trap, you can get updates from your trap no matter where you are! This innovative Wi-Fi-enabled trap pairs with an app on your smartphone or other mobile device and sends a notification to alert you of a catch, letting you know when it’s time to empty the trap without having to check.
Learn more
Agriculture Sensor Surface Mount
The Agriculture Surface Mount Sensor is is the ideal solution to streamline and simplify the collection of key soil and environmental metrics for crops, residential and commercial lawns and gardens and golf courses . The device provides a straightforward and easy to deploy solution for soil moisture and temperature, air temperature and humidity, and outdoor light monitoring. Enjoy increased crop yields and decreased operating expenses with the deployment of this versatile device.
Learn more
Vehicle Counting Sensor
The PlacePod Vehicle Counting sensor provides accurate, real-time vehicle counts for parking facilities and lots. PlacePod VC can be used in combination with PlacePod Vehicle Detection sensors to manage occupancy for individual spaces, such as spaces designated for people with disabilities and spaces with electric vehicle charging stations.
Learn more
Ambiance PIR T,H Sensor
The AMBIANCE sensor integrates into a single product all the functions necessary for the analysis of environmental and behavioral data: Humidity / Luminosity / Presence / Temperature
Learn more
External UV Sensor
This Polysense device utilizes an external UV Sensor to determine the severity of UV in its vicinity. It can help determine if any action needs to be taken to decrease UV exposure if necessary.
Learn more
Temp+Humidity+AirPressure+NO2 Smart Node
The Polysense WxS 8700 is a wireless gas sensing platform based on LoRa technology operating at license free spectrum (ISM), enabling both public and private IoT network deployments by service providers, municipality governments, enterprises. It’s deployed in star topology with very high density, particularly suited for industrial and enterprise IoT applications such as: Industrial campus safety, Smart and Safety, Environmental Monitoring, Subway security and safety, Hospitality safety and Residential complex, shopping center, CBD safety
Learn more
PlacePod In-Ground Vehicle Detection
PlacePod is an IoT-enabled smart parking sensor for on-street and off-street public and private parking management. PlacePod solves the most mission-critical aspects of parking management: accurate, real-time vehicle detection and the location of available parking spaces. The PlacePod sensor is a LPWAN-compatible vehicle detection device. It is built with PNI’s high-performance magnetic sensor and vehicle detection algorithms that accurately detect the presence or absence of a vehicle in a parking space. Each sensor has a unique ID for easy provisioning, tracking and management.
Learn more
Flow Meter
Robeau is the first smart connected flow meter that effectively displays your direct water consumption per water point The flow data is transmitted directly to the customer’s mobile, tablet and computer, or it can be accessed on the product’s small built-in screen with alerts about water usage and possible leaks transmitted in real time. By accurately monitoring your water usage, one can not only modify habits to be more environmentally responsible but also save 20 to 40 percent on your water bill!
Learn more
Smoke and Heat Dectector Sensor
The LS-134 is an M2M/IoT station that is LoRaWAN™ compliant for smoke and heat detectors that save lives by LoRa® every day. These small but effective devices are a vital fire safety early warning system, in both the workplace and the home.
Learn more
Waterproof LoRa Sensor Node v2
LSN50v2 is a Long Range LoRaWAN Sensor Node. It is designed for outdoor use and powered by Li/SOCl2 battery for long term use, power consumption and secure data transmission.It is designed to facilitate developers to rapidly deploy industrial level LoRaWAN and IoT solutions. LSN50 v2 helps users to turn the idea into a practical application and make the Internet of Things a reality. It is easy to program, create and connect your things everywhere.
Learn more
Submersible Water Level Sensor (3m)
EM500-SWL level sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It is designed to provide convenience of direct submergence in liquids for up to 200m reliable level measurement.
Learn more
LoRa Spy T2 Incubator Temperature Recorder
The LoRa® SPY T2 measures and records temperature thanks to an external probe. Designed to monitor thermo-controlled chambers, the LoRa® SPY T2 can be fixed outside thanks to its magnet allowing to visualize data measurement. With the PT100 moulded probe CL.A, Ø5x20mm with 30cm Sentoprene flat cable (-50 +105°C),
Learn more
Temperature Smart Node Sensor
This Polysense device is an industrial temperature smart node sensor. It has a durable IP67 enclosure.
Learn more
Wireless 2-Input Push Button Interface
The Wireless 2-Input Push Button Interfaceallows a notification signal to be sent when connected push button is pushed. When someone is in danger and needs emergency assistance, press the emergency push button device; R718T2 immediately sends an alarm message to the gateway.
Learn more
BLE Beacon
The beacon constantly broadcasts iBeacon information according to settings. It has built-in high-capacity button cell. The broadcasting interval is 500ms. The maximum standby time is approximately 6 years. The beacon is mainly used for indoor tracking. It can also be attached to assets and therefore used for asset tracking with the help of our Bluetooth gateways
Learn more
Temperature Monitoring
Automated Temperature Compliance Monitoring
Learn more
Dry Contact Interface
Netvox wireless dry contact sensors can be used to detect contact between two wired contact points. This sensor can be used with an external mechanical switch or a contact plate to alert the user via APP when the contacts touch or a switch is triggered.
Learn more
Soil Moisture
Skysens SkyAGR1 is cost-effective, easy to use soil moisture and temperature monitoring solution. It has long battery life, extendable temperature probe and water resistant.
Learn more
Smart-Kill Electronic Mouse Trap
When you’re dealing with a rodent problem, there’s plenty of frustrations to deal with – remembering to constantly check your traps shouldn’t be one of them. With the Victor Smart-Kill Electronic Mouse Trap, you can get updates from your trap no matter where you are! This innovative Wi-Fi-enabled trap pairs with an app on your smartphone or other mobile device and sends a notification to alert you of a catch, letting you know when it’s time to empty the trap without having to check.
Learn more
Elsys ERS CO2 Sensor
The Elsys ERS CO2 is a LoRaWAN room sensor that measures indoor environment. ERS CO2 is enclosed in an room sensor box and is designed to be wall mounted. Inside the ERS CO2 you will find five sensors: Temperature sensor, humidity sensor, light sensor, CO2 sensor and a motion sensor (PIR). The ERS CO2 is powered by two 3,6V AA lithium battery.
Learn more
Outdoor Door/Window Sensor
The door/window sensor uses a magnet to detect open/close events for doors, windows, or other applications that use a magnet to detect close proximity. The Armored Sensor™ IP67 weather-proof enclosure makes the sensor suitable for outdoor and industrial use. An indoor / smart building version is also available for low cost applications.
Learn more
Magnetic Door Sensor
NETOP MAGNETIC DOOR Sensor is a long range wireless sensor which can be used for opened/closed situations that provide information on the status of doors, windows, cabinets, etc. This sensor is fully compatible with LoRaWAN technology.
Learn more
Industrial Temperature Sensor (-50~200°C)
EM500-PT100 resistance temperature sensor is a long range wireless sensor compatible with standard LoRaWAN protocol. Combining with the advanced LoRa technology and 19000mAh battery make it a low power consumption product with years-long use life. It offers excellent accuracy over a wide temperature range from -200°C to 800°C to suit most applications
Learn more
Activity Event Counter (R718MBB)
The device detects the number of movements or vibrations (such as detecting the motor a few times a day), the maximum number of movements or vibrations can reach 232 times (theoretical value), and sends the information of the number of movements or vibrations to the gateway for processing. Apply SX1276 wireless communication module.
Learn more
Decentlab Tipping Bucket Rain Gauge
This LoRaWAN®-enabled tipping bucket rain gauge is a precipitation and weather monitoring system that meets the specifications of the World Meteorological Organization (WMO). The accumulated precipitation is very useful for reporting the amount of rain water over long periods. Moreover, the accumulated precipitation allows to calculate precipitation even for periods when no data could be transmitted to the network.
Learn more
Wireless 3-phase current meter (R718N370)
The NETVOX wireless three-phase current detector is used to detect three-phase electrical input current. The device is compatible with the LoRaWAN protocol, and integrates a chip module that conforms to the LoRaWAN wireless protocol to display the collected data in the gateway. The device is powered by battery and obtains the load AC current value through the current transformer. The device adopts the split-core current transformer, which can be conveniently connected to the measuring device.
Learn more
enLink Air-X LoRa Wireless Air Quality Monitor
enLink Air-X wireless Air Quality Monitor is a precision instrument which accurately measures up to 14 key environmental paramters including Temperature, Humidity, Oxygen, Carbon Dioxide, Carbon Monoxide, VOC’s, Ozone, Particulate Matter, Light Level and many more. Real-time readings are transmitted to the cloud using long range LoRa wireless where the data can be visualised and analysed. Air-X is designed for outdoor monitoring solutions.
Learn more
Indoor Water Leak Sensor
The wireless water leak sensor uses a water probe to detect the presence of water or other liquids. When the presence of water or another liquid is detected, an alert is sent over the wireless network.
Learn more
Infrared Thermometer/Surface Temperature Sensor
The infrared thermometer (pyrometer) allows remote surface temperature measurements. The sensor measures the thermal energy radiated by the target. Applications include: Outdoor remote monitoring, Road surface monitoring, Ice warning, Smart agriculture, Temperature control in manufacturing.
Learn more
BLE Probe
LW003-B is a LoRaWAN®-Based probe integrating LoRaWAN®-Based and Bluetooth wireless communication, LW003-B can scan BLE Beacon data and send data to LoRaWAN®-Based gateway, and then upload to server, so as to realize environmental monitoring and indoor positioning.
Learn more
SensorData LoRaWAN
The SensorData is a battery-powered data communicator that interfaces to a range of sensors, GPS, inputs and outputs, and uploads data via a LoRaWAN network. Great for agriculture and remote sensor monitoring applications.
Learn more
Condition Monitoring Sensor
WISE-2410 is a LoRaWAN wireless condition monitoring sensor integrated with an ARM Cortex-M4 processor, LoRa transceiver, 3-axis accelerometer and temperature sensor. It balances the wireless bandwidth between WISE-2410 and the gateway, so it also mitigates the data transmission fail rates between edge-devices and gateways. ISO 10816-3 compliant
Learn more
LoRa Spy Digital
The LoRa® SPY Digital is designed to monitor temperature in cold room and any under-controlled equipment and also for temperature and humidity in warehouse. It can only be used with external removable JRI temperature digital probes which have an internal memory storing their calibration adjustment coefficients and other metrological data. (probes available separately)
Learn more
LoRaWAN Datalogger
Ursalink UC1122 is designed as a cost-effective industrial machine monitoring device that monitors and controls up to 1 DC signal, 1 drivable relay output and 2 analog inputs. UC1122 supports standard LoRaWAN class C protocol, which is perfectly used as a remote data logger or a remote I/O controller.
Learn more
L-SPYUNIVE
The LoRa® SPY U recorder is designed to measure and record data coming from the following types of analog sensors: PT100, current (4-20 mA / 0-20mA), voltage (0-1V), counting or dry contact. (no probe included)
Learn more
Thermocouple Interface (R730CK2)
R718CK2 (nickel-chromium-nickel silicon thermocouple): its use temperature is -40 ~ +375℃, with good linearity, large thermoelectromotive force, high sensitivity, stability, can not be used directly at high temperature for sulfur, reducing or reducing It is not recommended for use in weak oxidizing atmospheres in oxidizing alternating atmospheres and in vacuum.
Learn more
LoRa Spy T2 Freezer Temp Recorder (3m)
The LoRa® SPY T2 measures and records temperature thanks to an external probe. Designed to monitor thermo-controlled chambers, the LoRa® SPY T2 can be fixed outside thanks to its magnet allowing to visualize data measurement. With the PT100 moulded probe CL.A, Ø5x20mm with 3m Sentoprene flat cable (-50 +105°C).
Learn more
Indoor Window & Door Sensor
Netvox’s wireless door/window sensor utilizes a magnetic switch to detect when a door or window is opened. Ideal for areas where access needs to be monitored, the wireless sensor sends an alert message to a centralised monitoring system via the LoRaWAN protocol when a window or door is opened.
Learn more
Get started today.
To learn more about our solutions, call (281) 667-0404, or request an online meeting.